Motor Oils

Series 2000 20W-50 Full Synthetic Racing Motor Oil

XL7500 5W-20 Full Synthetic Motor Oil

XL7500 5W-30 Full Synthetic Motor Oil

XL7500 10W-30 Full Synthetic Motor Oil

5W-30 Full Synthetic Motor Oil

0W-40 4-Stroke Synthetic Motor Oil

SAE 60 Heavy Weight Racing Oil

10W40 High Performance Full Synthetic Motor Oil

20W-50 High Performance Full Synthetic Motor Oil

10W-40 Synthetic Blend Motor Oil

"These engines run extremely hard. With AMSOIL, we can expect a 20 to 30 degree temperature drop, and that means more power being used for output." R.Z., Roanoke, Virginia

The number one choice for racers of all types of vehicles. Special synthetic base stock blend and advanced additive package provides up to four times the wear protection of other motor oils. Reduces friction for quicker engine response and increased horsepower. Product Code: TRO Recommended for Applications Requiring the Following Specifications: API SJ, SL, CF ACEA A2, A3, B2, B3 FORD ESR-M2C 179A VW 501.01, 505.00 CHRYSLER MS-8809A JASO VTW JASO MOTORCYCLE MB

Unbeatable Lubrication and Protection in High-Performance Gasoline Engines

Engines in race cars, high-performance street cars, ATVs and motorhomes face high temperatures, vigorous engine speeds or heavy loads, each a potent stressor. AMSOIL Series 2000 20W-50 Synthetic Racing Oil offers unmatched protection for engines facing tough operating conditions.

Unbeatable Wear Protection

AMSOIL Series 2000 20W-50 Synthetic Racing Oil is specially formulated to carry the oil's wear reducing and heat transferring agents to the engine's surfaces and hold them there. By positioning vital agents where they are most needed, Series 2000 provides a degree of engine protection unavailable with any other oil.

AMSOIL Series 2000 20W-50 Synthetic Racing Oil clings tenaciously to engine surfaces, so it shields engines from start-up wear. Further enhancing wear protection, AMSOIL Series 2000 20W-50 Synthetic Racing Oil's wax-free lubricating basestocks assure rapid post-start-up lubrication.

AMSOIL Series 2000 20W-50 Synthetic Racing Oil contains powerful corrosion preventives, detergents, dispersants and anti-foam agents to protect engines from the harmful effects of water, acids, debris, deposit-forming materials and air entrained oil.

Boosts Power, Speed and Efficiency

AMSOIL Series 2000 20W-50 Synthetic Racing Oil reduces friction so effectively that virtually none of the engine's power is wasted on "drag." Its extraordinary formulation gives Series 2000 a coefficient of friction lower than that of other fine, race-formulated synthetic oils. With Series 2000, vehicles accelerate fast, attain top speeds and use fuel efficiently.

Maintains Integrity in Demanding Conditions

AMSOIL Series 2000 20W-50 Synthetic Racing Oil maintains a constant high level of performance over time because it resists the damage many oils undergo in high temperature, intense shearing force conditions.

Advanced thermal stability allows AMSOIL Series 2000 20W-50 Synthetic Racing Oil to circulate readily, thus protecting hard-to-reach areas that heat-damaged oils grow too thick to reach.

Superior shear stability allows AMSOIL Series 2000 20W-50 Synthetic Racing Oil to provide a dependable pad of protection between parts even after exposure to shearing forces that tear lesser oils apart.

APPLICATION

AMSOIL Series 2000 20W-50 Synthetic Racing Oil is recommended for applications requiring the following specifications: 

• API SJ, SL, CF

• ACEA A2, A3, B2, B3

• FORD ESR-M2C 179A

• VW 501.01, 505.00

• CHRYSLER MS-8809A

• JASO VTW

• JASO MOTORCYCLE MB

MIXING AMSOIL

AMSOIL Series 2000 20W-50 Synthetic Racing Oil may be mixed with petroleum-based oils or with other synthetic oils. However, a mixture of AMSOIL Series 2000 20W-50 Synthetic Racing Oil and another oil may offer a shorter service life than pure AMSOIL Series 2000 20W-50 Synthetic Racing Oil does. The AMSOIL Product Warranty does not apply to mixtures of AMSOIL Series 2000 20W-50 Synthetic Racing Oil and other oils.

SERVICE LIFE

Non-turbo-charged, non-race gasoline engines: Change the oil at intervals up to three times longer than recommended by the manufacturer, or one year, whichever comes first.

Turbo-charged, non-race gasoline engines: drain oil at intervals up to three times longer than those recommended by the engine manufacturer, or six months, whichever comes first.

Race engines: Specified by Owner Experience/Oil Analysis.

Marine four-cycle gasoline engines and infrequently used automotive four-cycle gasoline engines: drain oil at intervals up to three times longer than those recommended by the engine manufacturer, or one year, whichever comes first.

Gasoline four-cycle fleet vehicle engines: drain oil at intervals up to two times as long, or six months, as engine manufacturer's recommendations if the findings of a conscientiously applied program of used oil analysis indicate the oil remains serviceable.

AMSOIL Full-Flow Oil Filters should be changed at 12,500-mile or six-month intervals, whichever comes first, in gasoline engines. If a Hastings or other filter is used, filter should be changed at manufacturer recommendations.

Synthetic XL-7500 Motor Oil Product Codes: XLF, XLT AMSOIL Synthetic XL-7500 5W-30 and 10W-30 motor oils are specially formulated to deliver 7500 miles or six months of service between oil changes. These oils provide outstanding wear protection and increased power, performance and fuel economy in high and low temperatures. AMSOIL XL-7500 Synthetic Motor Oils Are Recommended for Applications Requiring the Following Specifications: API SJ, CF ILSAC GF-2 CHRYSLER MS6395 H FORD ESE M2C-153G GM 4718M & 6094M JASO VTW MERCEDES BENZ AG 226.1

PRODUCT DESCRIPTION

AMSOIL XL-7500 Synthetic Motor Oils are specially formulated to provide outstanding wear protection, power, fuel economy and performance for 7,500 miles or six months of service. With AMSOIL XL-7500 Synthetic Motor Oils, motorists driving 15,000 miles a year need only change their oil twice annually. AMSOIL XL-7500 Synthetic Motor Oils offer a high degree of convenience and savings through their ability to perform and protect engines for extended periods.

Thermal and Oxidative Stability

The outstanding thermal and oxidative stability of AMSOIL XL-7500 Synthetic Motor Oils ensure the long-term physical and chemical integrity of the oils after exposure to engine operating temperatures. Oils with poor thermal and oxidative stability break down rapidly in engine operating temperatures. After breakdown, oils lose their ability to lubricate and protect engines, and the products of oil breakdown form sludge, varnish, deposits and acids. Poor thermal and oxidative stability are the top reasons conventional oils require frequent changing.

Low Volatility

Low volatility makes AMSOIL XL-7500 Synthetic Motor Oils highly resistant to oil consumption. High rates of oil consumption reduce the total volume of oil protecting an engine, impede oil's ability to lubricate, reduce fuel economy, increase exhaust emissions and make frequent oil changes necessary.

Shear Stability

Superior shear stability ensures AMSOIL XL-7500 Synthetic Motor Oils maintain their protective viscosity throughout their extended service life. Oils with poor shear stability lose viscosity relatively quickly, and with it lose their ability to protect engine components from metal-to-metal contact and wear, especially in high temperatures. To ensure proper engine protection, oils with low shear stability need frequent replacement.

High Temperature Performance

AMSOIL XL-7500 Synthetic Motor Oils offer outstanding high temperature engine protection and performance. Their outstanding heat-transfer capabilities help keep engines operating in their optimal temperature range in high-stress conditions. Conventional oils often allow engine heat to climb excessively during stressful operations, which promotes oil breakdown and engine wear.

In high temperature operations, AMSOIL XL-7500 Synthetic Motor Oils are better able to provide clean, dependable lubrication and protection than are conventional oils, due to the superior thermal-, oxidative-, and shear stability and lower volatility of AMSOIL XL-7500 Synthetic Motor Oils.

Low Temperature Performance

Wax-free synthetic stocks ensure the rapid flow of motor oil throughout the engine after startup, protecting engines when cold-stiffened conventional oils allow significant wear. AMSOIL XL-7500 Synthetic Motor Oils' low temperature fluidity also helps engines start dependable year-round and significantly improves cold temperature fuel economy.

Fuel Economy and Power

AMSOIL XL-7500 Synthetic Motor Oils enhance fuel economy and powerful performance. Their low coefficients of friction ensure the maximum delivery of engine power with minimal frictional losses.

Corrosion, Rust and Foam Control

AMSOIL XL-7500 Synthetic Motor Oils seal out rust, neutralize acids and resist foaming. Rust inhibition is an especially important feature for engines subject to frequent short-trip operations or for stored engines. Acid neutralization protects engines from damage caused by corrosive by-products of combustion. Foam resistance ensures protection against the metal-to-metal contact and wear that occurs with foamy oils.

Additive Durability

AMSOIL XL-7500 Synthetic Motor Oils contain top-quality additives designed for long-term performance. Loss of additive performance limits the durability of conventional motor oils. When conventional oils are left in place too long, they may expose engines to increased rates of wear, corrosion, deposit accumulation and sludge buildup. The long-life additives in AMSOIL Synthetic XL-7500 Synthetic Motor Oils are designed to keep engines clean and protected for 7,500 miles or six months, whichever comes first.

APPLICATION

AMSOIL XL-7500 Synthetic Motor Oils meet or exceed the following specifications:

• API SJ, CF
• ILSAC GF-2
• CHRYSLER MS6395 H
• FORD ESE M2C-153G
• GM 4718M & 6094M
• JASO VTW
• MERCEDES BENZ AG 226.1

MIXING AMSOIL

AMSOIL XL-7500 Synthetic Motor Oils are compatible with conventional petroleum oils. However, AMSOIL does not recommend using a mixture of XL-7500 oils and conventional oils for 7,500-mile or six-month drain intervals.

Engine oil additives are not recommended for use with AMSOIL XL-7500 oils.

NEW VEHICLES UNDER WARRANTY

All makers of domestic and foreign nameplate vehicles sold in North America recommend the use of specific viscosity grades of API certified oils. AMSOIL XL-7500 Synthetic 5W-30 and 10W-30 Motor Oils are API certified oils.

SERVICE LIFE

The recommended drain interval is 6 months or 7,500 miles; you should check fluids at periodic intervals and may need to top off fluids levels.

If an AMSOIL SDF filter is used, filter should be changed every 6 months or 7,500 miles. Change aftermarket or OEM full flow filters with every oil change.

AMSOIL PRODUCT WARRANTY

AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL products are used in full compliance with AMSOIL recommendations.

SAE 10W-30 SYNTHETIC MOTOR OIL
API Service SL, SJ, SH, CF

Custom-Blended for Superior Performance in Today's Engines

Product Code ATM AMSOIL 100% Synthetic 10W-30 Motor Oil is designed to provide maximum benefits in gasoline-fueled engines. It is recommended for applications requiring the following specifications: API SL, SJ, SH, CF ILSAC GF-3, GF-2 CHRYSLER MS6395 J, MS 9754 FORD WSS M2C-153G GM 4718-M VW 502.00, 505.00 DB 229.1, 229.3

PRODUCT DESCRIPTION

AMSOIL 100% Synthetic 10W-30 Motor Oil exceeds the lubrication requirements of all modern automobile engines. It provides tough lubricating protection in the most demanding operating conditions. AMSOIL 10W-30 resists high temperature degradation and flows freely in cold conditions for superior protection against engine wear. AMSOIL 10W-30 also provides maximum power and improved fuel efficiency.

Resists Vaporization

Conventional motor oils tend to "boil off" in high temperatures. Losing up to 25 percent of their original weight in high temperature service, vaporized oils grow thick and heavy. They circulate poorly, reduce fuel efficiency and contribute to excessive emissions and engine wear. Of course, oil consumption skyrockets as oil boils off.

AMSOIL Synthetic 10W-30 Motor Oil is highly resistant to vaporization, losing only 6.6 percent of its weight in high temperature service. In fact, AMSOIL Synthetic 10W-30 Motor Oil resists vaporization so well, it surpasses rigorous European standards, set at 13 percent weight loss in high temperature testing. In the engine, AMSOIL Synthetic 10W-30 Motor Oil's superior vaporization resistance keeps fuel economy high; oil circulation efficient; and oil consumption, emissions, and most importantly, engine wear, to a minimum.

Provides High Shear Stability

The shearing forces generated inside today's smaller, high RPM automobile engines can literally tear apart the molecules of conventional oils. AMSOIL 10W-30, because of its unique synthetic construction, withstands shearing forces. AMSOIL 10W-30 doesn't thin out and lose viscosity like conventional oils do. AMSOIL Synthetic 10W-30 Motor Oil surpasses the North American AAMA, Japanese JASO and European ACEA oil specifications for high temperature/high shear viscosity. AMSOIL 10W-30 delivers long-lasting 10W-30 protection to prevent wear under the hottest and heaviest-loaded conditions.

Resists Oxidation and Thermal Breakdown

AMSOIL 10W-30 resists oil breakdown from heat, blowby chemicals and oxygen longer than do conventional oils. AMSOIL 10W-30 resists forming varnish deposits and sludge. It doesn't thicken like petroleum oils, but continues to cool and lubricate, providing peak engine performance, power and protection. In addition, the advanced heat transfer capabilities and high lubricity of AMSOIL 10W-30 keeps engines, transmissions and gear boxes running in their optimal temperature range, for top performance and long life.

Provides Low Temperature Protection

AMSOIL 10W-30 remains fluid at temperatures as low as -54°F (-48°C) so it permits easy engine cranking for fast starts. During sub-zero temperatures, it flows to all parts of the engine in much less time than conventional petroleum oils take, which greatly reduces the rate of wear and increases engine life.

Resists Deposit Formation

Because AMSOIL 10W-30's synthetic formulation resists oxidation so well, it runs naturally cleaner than conventional oils. AMSOIL 10W-30 has a superior detergent/dispersant additive package that, when tested after tens of thousands of miles of use in the crankcase, still exhibits outstanding deposit control.

Inhibits Rust and Corrosion

AMSOIL 10W-30 contains powerful rust and corrosion inhibitors to protect iron parts and bearing materials.

Provides Extended Drain Intervals

Due to its superior synthetic composition and advanced performance additives, AMSOIL 10W-30 performs much longer than do conventional petroleum and other synthetic motor oils. No other major oil manufacturer matches AMSOIL's 25,000-mile or one-year drain interval recommendations.

APPLICATION

AMSOIL 100% Synthetic 10W-30 Motor Oil is designed to provide maximum benefits in gasoline-fueled engines. It is recommended for applications requiring the following specifications:

• API SH, SJ, CF
• ILSAC GF-2, GF-3
• CHRYSLER MS6395 J, MS 9754
• FORD WSS M2C-153G
• GM 4718-M
• VW 502.00, 505.00
• DB 229.1, 229.3

MIXING AMSOIL

AMSOIL 100% Synthetic 10W-30 Motor Oil is compatible with conventional petroleum oils; however, mixing AMSOIL 10W-30 with a conventional oil will shorten the drain period of AMSOIL 10W-30. Engine oil additives or after-market products are not recommended for use with AMSOIL 10W-30.

SERVICE LIFE

• Personal passenger vehicles with gasoline engines: drain oil at 25,000-mile or one-year intervals, whichever comes first.
• Turbocharged gasoline engines: drain oil at intervals up to three times as long as those recommended by the engine manufacturer or at six-month intervals, whichever comes first.
• High performance and racing engines: Drain oil at engine manufacturer's recommended drain intervals.
• Light-duty and nonturbocharged diesel engines: drain oil at intervals up to twice as long as engine manufacturer's recommended drain intervals when used oil analysis supports these longer drain intervals or at six-month intervals.
• Heavy-duty and turbocharged diesel engines: this oil is not recommended for use in this application.
• Motorcycles, ATVs, etc.: use engine manufacturer's recommended drain interval.
• Marine craft and occasionally used gasoline engines: drain oil at intervals up to three times as long as those recommended by the engine manufacturer or at one-year intervals, whichever comes first.
• Gasoline fleet vehicles and industrial engines: drain oil at intervals up to three times the engine manufacturer's recommended drain intervals or at six-month intervals, whichever comes first.

PRODUCT DESCRIPTION
AMSOIL Formula 4-Stroke Synthetic Motor Oil is specially formulated for four-stroke recreational motors, including ATVs, outboard motors and motorcycles. It may also be used in cars and trucks. Its broad viscosity range makes it excellent for use in both hot and cold temperature extremes.

Resists High Temperature Vaporization
Conventional motor oils tend to vaporize and lose weight in high temperature conditions, contributing to poor oil circulation, reduction in fuel efficiency and excessive emissions and engine wear. AMSOIL Formula 4-Stroke Synthetic Motor Oil is highly resistant to evaporation. While conventional petroleum oils thicken due to evaporation, AMSOIL Formula 4-Stroke Synthetic Motor Oil maintains its viscosity in high temperature service. The superior evaporation resistance of AMSOIL Formula 4-Stroke Synthetic Motor Oil keeps engine wear, oil consumption and emissions to a minimum, while keeping oil circulation efficient and fuel economy high.

Friction Modifier Free
AMSOIL Formula 4-Stroke Synthetic Motor Oil contains no friction modifiers, making it ideal for ATV, outboard motor and motorcycle engines. The friction modifier free formulation of AMSOIL 4-Stroke ensures transmission (manual or automatic) and clutch compatibility and prevents slip. 

Performance Formulated
AMSOIL Formula 4-Stroke Synthetic Motor Oil contains a robust dispersant/detergent package, making it ideal for use in high-stress four-cycle engines. The dispersant/detergent additive package effectively suspends harmful combustion by-products and prevents deposits, keeping AMSOIL Formula 4-Stroke clean and serviceable.

High-temperature operations often lead to the thermal degradation and oxidation of conventional oils, leading to the formation of deposits, sludge and varnish. The superior oxidative and thermal stability of AMSOIL Formula 4-Stroke Synthetic Motor Oil inhibits the formation of varnish, deposits and sludge so equipment runs clean in high-stress, high temperature operations. 

Temperature and Performance
AMSOIL Formula 4-Stroke Synthetic Motor Oil has a broad viscosity range, making it excellent for use in both hot and cold temperature extremes. As an SAE 40 weight motor oil, AMSOIL Formula 4-Stroke provides superior protection for hot operating, hard working motors, while its SAE 0W rating ensures easy cranking, excellent cold weather starting and quick post-startup protection. 

Copper Corrosion, Rust and Foam Inhibition
AMSOIL Formula 4-Stroke Synthetic Motor Oil protects equipment from copper corrosion and rust, even during equipment storage. AMSOIL Formula 4-Stroke Synthetic Motor Oil does not foam in service, protecting equipment from the metal-to-metal contact and wear that occurs with use of foam-filled fluids.

Applications and Recommendations
AMSOIL Formula 4-Stroke Synthetic Motor Oil may be used in all applications specifying 0W-40, 5W-30, 10W-30 and 10W-40 viscosity grades and is recommended for applications specifying the following:

• API SJ, SH, SG, SF, CD, CF
• JASO MA

Use in Yamaha®, Suzuki®, Honda®, Mercury®, Kawasaki®, Arctic Cat®, Polaris®, Nissan® and Bombardier® motors and transmissions. Safe in wet or dry sumps. Recommended for manual or automatic clutches.

Compatibility
AMSOIL Formula 4-Stroke Synthetic Motor Oil is compatible with other four-stroke fluids. However, a mixture of AMSOIL Formula 4-Stroke Synthetic Motor Oil and another oil may offer a shorter service life than pure AMSOIL Formula 4-Stroke Synthetic Motor Oil.

AMSOIL Formula 4-Stroke Synthetic Motor Oil is compatible with and recommended for use with clutch plates in ATV’s and motorcycle transmissions.

Installation
Change AMSOIL Formula 4-Stroke Synthetic Motor Oil according to manufacturer's recommendations, without oil filtration. With oil filtration (AMSOIL SDF Filter), up to 2 times longer than manufacturer's recommendations or 6 months, whichever comes first. If a Hastings or other filter is used, filter should be changed at manufacturer's recommendations.

SAE 10W-40 SYNTHETIC
HIGH PERFORMANCE MOTOR OIL

API Service SL, SJ, SH, CH-4, CG-4, CF-2, CF, CD.

AMSOIL High Performance Synthetic 10W-40 Motor Oil is designed to provide maximum benefits in gasoline and diesel engines.

Product Code: AMO AMSOIL High Performance Synthetic 10W-40 Motor Oil is Recommended for Applications Requiring the Following Specifications: API SL, SJ, SH, CH-4, CG-4, CF-2, CF, CD ACEA A2, A3, B2, B3, E2, E3 CHRYSLER MS 6395-H CUMMINS CES 20071, 20072, 20076 FORD WSS-M2C 153G MERCEDES-BENZ 226.1, 227.1, 228.3 MACK EO-L, EO-M, EO-M+ VOLVO VDS, VDS-2 VOLKSWAGEN 501.01, 505 ALLISON C-3, C-4 CATERPILLAR TO-2, TO-3 JASO-MA (Motorcycle)

PRODUCT DESCRIPTION

AMSOIL High Performance Synthetic 10W-40 Motor Oil provides superior protection and performance in the most severe automotive driving conditions. AMSOIL High Performance Synthetic 10W-40 Motor Oil provides a wide range of protection in all four-cycle gasoline and diesel engines, including pickups, RVs, cars and off-highway vehicles. It is recommended for use in vehicles subject to stop-and-go driving, short trips, high temperatures, frequent trailer pulling and off-road use.

RESISTS HIGH TEMPERATURE VAPORIZATION

Conventional motor oils tend to "boil off" in high temperatures, losing up to 25 percent of their original weight. These vaporized oils circulate poorly, reduce fuel efficiency and contribute to excessive emissions and engine wear. AMSOIL High Performance Synthetic 10W-40 Motor Oil resists vaporization. In fact, according to the NOACK Volatility Test, which measures the weight loss of an oil due to evaporation, AMSOIL High Performance 10W-40 only loses 7.0 percent of its weight in high temperature service, surpassing rigorous European standards set at 13 percent weight loss in high temperature testing. The superior vaporization resistance of AMSOIL High Performance 10W-40 keeps engine wear, oil consumption and emissions to a minimum, while keeping oil circulation efficient and fuel economy high.

RESISTS OXIDATION AND THERMAL BREAKDOWN

Conventional oils oxidize in high operating temperatures, producing sludge and deposit build-up that contribute to corrosion, increased engine wear and decreased fuel economy. AMSOIL High Performance Synthetic 10W-40 Motor Oil resists oil breakdown, maintaining its cooling and lubricating properties and providing extended drain intervals. It continues to provide maximum protection at temperatures that oxidize conventional oils. The advanced heat transfer capabilities and high lubricity of AMSOIL High Performance Synthetic 10W-40 Motor Oil keep engines running in their optimum temperature range for top performance and long life.

PROVIDES HIGH SHEAR STABILITY

AMSOIL High Performance Synthetic 10W-40 Motor Oil surpasses the North American SAE and European ACEA oil specifications for high temperature/high shear (HTHS) viscosity. It retains its viscosity at temperatures and loads that cause conventional oils to shear back to a lower viscosity. AMSOIL High Performance Synthetic 10W-40 Motor Oil maintains an extremely protective viscosity of 3.93 cP at 302°F (150°C) in the ASTM D 4683 High Temperature/High Shear Test, significantly exceeding test limits.

PROVIDES LOW TEMPERATURE PROTECTION

AMSOIL High Performance Synthetic 10W-40 Motor Oil remains fluid at temperatures as low as -54°F (-48°C), permitting easy engine cranking for quick starts. During sub-zero temperatures, it flows to all parts of the engine much quicker than conventional petroleum oils, greatly reducing the rate of wear and increasing engine life.

RESISTS DEPOSIT FORMATION

AMSOIL High Performance Synthetic 10W-40 Motor Oil is highly resistant to oxidation, running significantly cleaner than conventional motor oils. AMSOIL 10W-40 has a superior detergent/dispersant additive package that, when tested after tens of thousands of miles of use in the crankcase, still exhibits outstanding deposit control.

INHIBITS RUST AND CORROSION

AMSOIL High Performance Synthetic 10W-40 Motor Oil contains special rust and corrosion inhibitors to protect iron parts, as well as copper, lead and aluminum bearing materials.

PROVIDES EXTENDED DRAIN INTERVALS

AMSOIL High Performance Synthetic 10W-40 Motor Oil features a superior synthetic composition and advanced performance additives, performing much longer than competing conventional and synthetic oils. No other major oil manufacturer matches AMSOIL's 25,000-mile or one-year drain interval recommendations.

APPLICATIONS

AMSOIL High Performance Synthetic 10W-40 Motor Oil may be used in gasoline or diesel engines and is recommended for applications requiring the following specifications:

• API SJ, SH, SG, SF, CH-4, CG-4, CF-2, CF, CD
• ACEA A2, A3, B2, B3, E2, E3
• CHRYSLER MS 6395-H
• CUMMINS CES 20071, 20072, 20076
• FORD WSS-M2C 153G
• MERCEDES-BENZ 226.1, 227.1, 228.3
• MACK EO-L, EO-M, EO-M+
• VOLVO VDS, VDS-2
• VOLKSWAGEN 501.01, 505
• ALLISON C-3, C-4
• CATERPILLAR TO-2, TO-3
• JASO-MA (Motorcycle)

MIXING AMSOIL

AMSOIL High Performance Synthetic 10W-40 Motor Oil is compatible with conventional petroleum oils; however, mixing AMSOIL 10W-40 with a conventional oil will shorten the drain period of AMSOIL 10W-40. Engine oil additives or after-market products are not recommended for use with AMSOIL 10W-40.

SERVICE LIFE

• In personal cars and light-duty trucks with non-turbocharged gasoline engines, drain oil at 25,000 miles or one-year intervals, whichever comes first.
• In turbocharged gasoline engines, change oil at three times the engine manufacturer's recommended drain interval or six months, whichever comes first.
• In high performance and racing engines, change oil at intervals specified by used oil analysis.
• In light-duty and non-turbocharged diesel engines, change oil at two or more times the engine manufacturer's recommended drain intervals if the findings of used oil analysis support those drain intervals or six months, whichever comes first.
• In heavy duty and turbocharged diesel engines, change oil at two or more times the engine manufacturer's recommended drain intervals if the findings of used oil analysis support those drain intervals or six months, whichever comes first.
• In marine craft and occasionally used gasoline engines, change oil at three times the engine manufacturer's recommended drain interval or one year, whichever comes first.
• In fleet vehicles and industrial gasoline engines, change oil at three times the engine manufacturer's recommended drain interval or six months, whichever comes first.

If the vehicle is equipped with an AMSOIL Oil Filter, the filter should be changed at 12,500-mile or six-month intervals (whichever comes first) in gasoline engines. Non-AMSOIL oil filters should be changed at the engine manufacturer's recommended filter change interval.

BACK