A Look at the History of Oil Filtration

One of the most important functions of motor oil is to capture and suspend contaminants and wear particles, preventing premature wear on an engine’s internal parts. Acting alone, motor oil would quickly become saturated with these contaminants and wear materials and would require very frequent changing, perhaps as often as every 500 miles, in order to effectively guard against wear. An engine’s oil filter allows motor oil to last for an extended period of time. The earliest automobiles had no oil .ltration, and it was common to change oil every 500 to 2,000 miles  Later, as pressure lubrication became standard on automobiles, some kind of oil filtration was necessary to protect the oil pump from damage and wear. Early designs were primitive, often consisting of nothing more than steel wool, wire meshes or screens placed in the oil pump intake. Many designs were cleanable and reusable. The earliest incarnation of the modern oil filter  came about in 1923, when Ernest Sweetland introduced his invention known as the “Purolator,” a combination of the words “Pure Oil Later.” Incorporated into the lubricating system after the oil pump and before the oil flows into the engine bearings, the original Purolator featured an upright series of seven twill weave cloth-covered, perforated plates encased in a heavy-duty cast container. It also had a sight feed glass on one side, enabling the owner to see the oil flow and change the filter when flow slowed to a trickle. James A. Abeles saw enough potential in the  Purolator to convert a New York City garage into a company called Motor Improvements Inc., developed primarily to manufacture Purolator filters. The Maxwell Chalmers Company also saw promise in this new product, installing a Purolator on a Maxwell automobile which was test-driven on a round-trip from Detroit to the West Coast in 1924. The longer oil drain intervals, cleaner oil and reduced engine wear offered by the Purolator ensured endorsement by the automotive industry, and they soon became standard on many popular automobiles of the day, including  Studebaker, Pierce Arrow, Hupmobile, Peerless, Cadillac, Oakland, Gardner, Moon, Jordan, Buick and Dodge. Oil filter technology continued to progress over the years. In the late 1930s, cotton waste material was introduced as filtration media, providing the first filter replacement capability. Various woven fabrics were also used in some filter designs. 

By 1946, as disposable filter models became the norm and interest in saving production costs increased, materials such as pleated paper and cellulose became the filtration media materials of choice, materials that are still widely used in today’s oil filters. Prior to 1943, most oil filters were of the “by-pass” variety, only filtering about 10 percent of the oil at a time. The first “full-flow” oil filter, capable of filtering  100 percent of the motor oil, was introduced in 1943 and became standard on mass production vehicles by 1946. The modern disposable “spin-on” oil filter design was introduced in 1955, replacing “cartridge-type” filters which had to be placed in a special housing or canister. The technology progressed throughout the 1960s and spin-on oil filters soon became standard on virtually all American, European and Japanese automobile designs Today’s spin-on oil filters resemble metal cans that encase the filtration media, which capture and hold the various organic and inorganic contaminants and wear metals within the motor oil. Organic contaminants include bacteria and other organisms that make up sludge, while inorganic contaminants include dust and dirt. An engine’s oil pump pumps motor oil from the oil sump to the oil filter. Dirty oil passes through the oil filter media, where it is cleaned before flowing to the central tube and back into the engine through the mounting stud. Oil is then distributed by oil passages throughout the engine.  

By-Pass Oil Filters

Secondary by-pass oil filters act separately from an engine’s full-flow filter and only filter a small portion of the oil in a system at a time, subjecting it to additional and more thorough cleaning than the full-flow filter is able to provide. Various styles of by-pass systems exist on the market today. Some feature centrifuge or thermal action, spinning or boiling out contaminants, while others feature extremely ef.cient media that remove smaller contaminants. Originally marketed as a way to effectively extend equipment life, by-pass filters are also effective in keeping oil clean and capable of extended drain intervals.

The AMSOIL Advantage

As previously mentioned, many of today’s conventional oil filters make use of pleated paper or cellulose as their filtration media. Although these filters usually display good flow characteristics when new, they tend to become obstructed fairly quickly. In addition, these conventional filters exhibit limited capacity, longevity and ability to catch fine particles. AMSOIL Super Duty Oil Filters (SDF) are designed for maximum efficiency, capacity and longevity, while meeting the high flow demands of modern engine designs. In fact, with its advanced filtration media composed of a special cellulose, synthetic and glass blend, AMSOIL SDF Oil Filters have over a 75 percent better combined efficiency/capacity rating than other popular oil filters as tested according to industry standards. AMSOIL SDF Filters are also approximately 65 percent efficient at removing 10 micron particles. In addition, AMSOIL SDF Filters are designed for extended drain intervals of 12,500 miles or six months (whichever comes first), making them ideal for use with premium AMSOIL Synthetic Motor Oils.

AMSOIL By-Pass Filtration

Advanced engine designs place tough demands on an engine’s full-flow filter, most of which are capable of efficiently filtering out only coarser wear particles, generally greater than 20 to 25 microns. However, approximately 60 percent of engine wear is caused by particles in the 5 to 20 micron range. These tiny particles closely match the precision clearances between critical engine components, entering the spaces between bearings, rings and other components and damaging metal surfaces, altering tolerances, fatiguing components and generating additional debris. For the ultimate in filtration efficiency and wear protection, AMSOIL offers the Spin-On By-Pass Oil Filter. The AMSOIL By-Pass Oil Filter provides the best possible filtration on the market, protecting against wear, oil degradation, rust and corrosion. Situated outside the main line of oil circulation, the AMSOIL By-Pass Filter works in conjunction with the full-flow filter, thoroughly filtering 10 percent of the oil at a time and removing wear-causing contaminants down to less than one micron in size. The AMSOIL By-Pass Filter effectively filters all the oil in a six quart system in about five minutes at an average speed of 45 mph. Water enters motor oil as a combustion by-product or as a condensate. When it contaminates motor oil, it can cause serious engine damage by causing metal surface rust and corrosion, which increases friction and wear and deteriorates the close-fitting tolerances between engine components. It can also react with other contaminants to form corrosive acids, which also damage metal components. The AMSOIL By-Pass Filter effectively removes up to a pint of damaging water, significantly increasing the time oil can be safely left in the engine. The effectiveness of the AMSOIL By-Pass Filter lies in its construction. Its high-capacity filtration medium is a special blend of virgin wood and cotton fibers, formed into discs, stacked and compressed. The center tube is all-steel, perforated for oil flow and wrapped with a fine mesh cotton screen. Each filter includes a mounting unit with a spin-on filtering cartridge, connected by hoses to engine ports. Particles sized down to less than one micron are trapped and removed, while the filter’s thirsty cellulose fibers remove water. 

By-Pass Filter Accessories:

The AMSOIL Dual Remote Oil Filtration System allows an AMSOIL Super Duty Oil Filter and an AMSOIL Spin-On By-Pass Filter to be attached onto a remote mount, providing easy access for both filters. Remote placement of the Dual Remote system allows larger oil filters to be used and increases oil sump capacity. The AMSOIL Dual-Gard Filtration System links two AMSOIL By-Pass Filter elements together for engines with sump capacities greater than 20 quarts.